Difference between revisions of "Sample Preparation for Joint 11-BM and 11-ID-B Measurements"
(Created page with "===Horizontal - Focused at Sample=== frameless|600px| horz profile tightest horizontal focus at the sample position The image below shows a burn of beam sha...") |
|||
| Line 5: | Line 5: | ||
The image below shows a burn of beam shape at the sample position beam with the tightest horizontal focus possible at the sample position. | The image below shows a burn of beam shape at the sample position beam with the tightest horizontal focus possible at the sample position. | ||
[[Image: | [[Image:11IDB_holder1.png|frameless|300px| 11IDB_holder1]] | ||
[[Image:11IDB_holder2.png|frameless|300px| 11IDB_holder2]] | |||
[[Image:11BM_holder1.png|frameless|300px| 11BM_holder1]] | |||
[[Image:11BM_holder2.png|frameless|300px| 11BM_holder2]] | |||
[[Image:DuelMeasurmentCapillary.png|frameless|300px| DuelMeasurmentCapillary] | |||
Users anticipating performing complimentary scattering measurements on a single sample at other APS powder beamlines should consider using the following standard Cole-Parmer sizes. These are compatible with samples holders at the beamlines noted below. However, it is also important to contact beamline staff for details on sample loading & capillary lengths before preparing your sample for complimentary measurements. | |||
Capillary ID size x OD size, Cole-Parmer Part#, Standard Size @ APS Beamlines | |||
0.0320" (0.81 mm) x 0.0340" (0.86 mm), # 95820-06, @ 11-BM, 17-BM | |||
Revision as of 01:27, 5 March 2013
Horizontal - Focused at Sample
The image below shows a burn of beam shape at the sample position beam with the tightest horizontal focus possible at the sample position.
[[Image:DuelMeasurmentCapillary.png|frameless|300px| DuelMeasurmentCapillary]
Users anticipating performing complimentary scattering measurements on a single sample at other APS powder beamlines should consider using the following standard Cole-Parmer sizes. These are compatible with samples holders at the beamlines noted below. However, it is also important to contact beamline staff for details on sample loading & capillary lengths before preparing your sample for complimentary measurements.
Capillary ID size x OD size, Cole-Parmer Part#, Standard Size @ APS Beamlines
0.0320" (0.81 mm) x 0.0340" (0.86 mm), # 95820-06, @ 11-BM, 17-BM
