Sample Preparation for Joint 11-BM and 11-ID-B Measurements

From Ug11bm
Jump to navigationJump to search

The images below show how a capillary could be prepared for complimentary scattering measurements to be compatible with high throughput sample holders at both beamlines 11-BM (robot loading) and 11-ID-B (linear sample cassette).

In the images below, the black colored sections of capillary show where sample powder is required. Red colored sections show the location of epoxy or some similar substance to seal the capillary.

These images show a capillary with a diameter = 0.0575" (1.46 mm). Contact beamline staff for full details on sample loading & capillary diameters and lengths before preparing your sample for complimentary measurements.





Properly prepared sample for the 11-BM mail-in service