View source for Sample Preparation for Joint 11-BM and 11-ID-B Measurements

The images below show how a capillary could be prepared for complimentary scattering measurements to be compatible with high throughput sample holders at both beamlines 11-BM (robot loading) and 11-ID-B (linear sample cassette).

In the images below, the '''black colored'''  sections of capillary show where sample powder is required.  <span style="color:red"><B>Red colored</b></span> sections show the location of epoxy or some similar substance to seal the capillary. 

These images show a capillary with a diameter =  0.0575" (1.46 mm). Contact beamline staff for full details on sample loading & capillary diameters and lengths before preparing your sample for complimentary measurements.


[[Image:DuelMeasurmentCapillary.png|frameless|400px| DuelMeasurmentCapillary]]

[[Image:11IDB_holder2.png|frameless|400px| 11IDB_holder2]]

[[Image:11IDB_holder1.png|frameless|400px| 11IDB_holder1]]

[[Image:11BM_holder2.png|frameless|400px| 11BM_holder2]]

[[image:SampleBase_Diagram.png|400px|Properly prepared sample for the 11-BM mail-in service]]