Difference between revisions of "Hazards"

From Ug11bm
Jump to navigationJump to search
Line 12: Line 12:
*Regulated Soils ([http://www.aps.anl.gov/Safety_and_Training/Soil/index.html definition)]
*Regulated Soils ([http://www.aps.anl.gov/Safety_and_Training/Soil/index.html definition)]
*Explosives or Unstable Materials ([http://www.aps.anl.gov/Safety_and_Training/Hazardous_Materials/materialhazarddefs.html definition])
*Explosives or Unstable Materials ([http://www.aps.anl.gov/Safety_and_Training/Hazardous_Materials/materialhazarddefs.html definition])


The mail-in service does '''NOT''' accept any sample material with '''more than one''' of the following hazards:  
The mail-in service does '''NOT''' accept any sample material with '''more than one''' of the following hazards:  

Revision as of 03:05, 9 June 2012

see http://11bm.xor.aps.anl.gov/hazardlinks.html for more info...

Be aware of APS safety and training guidelines www.aps.anl.gov/Safety_and_Training/

Mail-in Measurments

The mail-in service does NOT accept samples with any of the following hazards:


The mail-in service does NOT accept any sample material with more than one of the following hazards:

  • Flammable
  • Corrosive
  • Oxidizer


RCRA regulated metals (the heavy metals Ag, As, Ba, Cd, Cr, Hg, Pb and Se) can be accepted, but samples containing them must be identified.

Additionally, all registered samples shipped to the APS must qualify for small quantity exceptions under U.S. Dept. of Transportation (DOT) regulations (CFR Title 49 § 173.4).

Please take special care to ensure that samples potentially hazardous to beamline staff (Nano, Toxic, Carcinogenic, Flammable, etc) are securely contained and permanently sealed in the Kapton tubes.

Inquire about special sized sample mounting bases and double nesting Kapton tubes if your permissible samples are particularly hazardous or air sensitive.

On-Site Experiments

Please complete your ESAF ~ 2 weeks prior to the start of the experiment.

http://www.aps.anl.gov/Safety_and_Training/Experiment_Safety_Approval_Form/