34ID-E is an undulator beamline dedicated to x-ray micro/nano-diffraction activities at the Advanced Photon Source.
The x-ray micro/nano-diffraction facility focuses x-ray beam to smaller than 0.5μm × 0.5μm for use in diffraction techniques using Kirkpatrick-Baez (K-B) mirrors. A specially designed micro-monochromator allows the selection of either polychromatic or monochromatic conditions with a fixed focal spot on the sample.
Polychromatic x-ray microscopy utilizes Laue diffraction method to characterize crystalline structure in materials. By scanning a differential aperture, spatially resolved microdiffraction measurements can be made in all three dimensions with sub-μm resolution. Properties that can be measured include the local crystalline phase, local texture (orientation), and the local strains.
After a canting upgrade in 2011, Sector 34ID now has two independent undulators placed in tandem along the storage ring. X-rays generated by them are horizontally separated. 34ID-E takes the inboard beam, while the outboard beam goes into 34ID-C for coherent diffraction imaging experiments.
The development of the microbeam experimental capabilities were sponsored by the DOE Office of Science.
|
Beam Parameters
|
Source Type |
Undulator A, 3.3 cm period, 2.2 m
|
Energy Range |
7 - 30 keV
|
Beam Size |
300 - 500 nm (H) × 300 - 700 nm (V)
|
Energy Resolution (ΔE/E) |
1 × 10-4
|
Beam Flux (photons/sec)
|
1 × 1011 (white)
|
1 × 109 (mono)
|
|
Contacts
|
|
|