Difference between revisions of "RRM 3-14"
From EPICSWIKI
m (→EPICS 3-14 Record Reference Manual: Alphabetically order aai and aao record types) |
|||
| Line 55: | Line 55: | ||
* [[RRM 3-14 Archive|archive - Archive]] | * [[RRM 3-14 Archive|archive - Archive]] | ||
* [http://www.aps.anl.gov/epics/modules/soft/asyn/R4-24/asynRecord.html asyn] | |||
* [[RRM 3-14 CPID Control|cpid - CPID Control]] | * [[RRM 3-14 CPID Control|cpid - CPID Control]] | ||
* [[RRM 3-14 PID Control|pid - PID Control]] | * [[RRM 3-14 PID Control|pid - PID Control]] | ||
| Line 64: | Line 65: | ||
* [[RRM 3-14 Timer|timer - Timer]] | * [[RRM 3-14 Timer|timer - Timer]] | ||
* [[RRM 3-14 Wait|wait - Wait]] | * [[RRM 3-14 Wait|wait - Wait]] | ||
* synApps records | |||
** [http://www.aps.anl.gov/bcda/synApps/alive/aliveRecord.html alive] | |||
** [http://www.aps.anl.gov/bcda/synApps/calc/aCalcoutRecord.html acalcout] Array Calculation Output | |||
** [http://www.aps.anl.gov/bcda/synApps/sscan/busyRecord.html busy] Signal put_callback() completion | |||
** [http://cars9.uchicago.edu/software/epics/camacRecord.html camac] Generic CAMAC Record | |||
** [http://www.aps.anl.gov/bcda/synApps/vac/README.txt digitel] Vacuum controller | |||
** [http://cars9.uchicago.edu/software/epics/dxpRecord.html dxp] | |||
** [http://www.aps.anl.gov/bcda/synApps/std/epidRecord.html epid] Enhanced PID | |||
**[http://cars9.uchicago.edu/software/epics/mcaRecord.html mca] Multichannel analyzer, multichannel scaler | |||
** [http://www.aps.anl.gov/bcda/synApps/motor/R6-8/motorRecord.html motor] Stepper and servo motor | |||
** [http://www.aps.anl.gov/bcda/synApps/calc/sCalcoutRecord.html scalcout] String Calculation Output | |||
** [http://www.aps.anl.gov/bcda/synApps/std/scalerRecord.html scaler] Multibank counter | |||
** [http://www.aps.anl.gov/bcda/synApps/sscan/sscanRecord.html sscan] Set conditions, trigger detectors, record data, write data files | |||
** [http://www.aps.anl.gov/bcda/synApps/sscan/scanparmRecord.html scanparm] One-button scan | |||
** [http://www.aps.anl.gov/bcda/synApps/std/sseqRecord.html sseq] String sequence | |||
** [http://www.aps.anl.gov/bcda/synApps/calc/swaitRecord.html swait] Calcout variant | |||
** [http://www.aps.anl.gov/bcda/synApps/optics/tableRecord.html table] Optical table | |||
** [http://www.aps.anl.gov/bcda/synApps/calc/transformRecord.html transform] Calc variant | |||
** [http://cars9.uchicago.edu/software/epics/vmeRecord.html vme] Generic VME access | |||
** [http://www.aps.anl.gov/bcda/synApps/vac/README.txt vs] Vacuum sensor | |||
Revision as of 20:52, 3 December 2014
Help Needed!
This documentation has been revised since the older 3-13 version, but the software has been updated significantly since the docs were written so there may still be a number of inaccuracies here. The Editing Tasks page gives some ideas on what else might need doing.
EPICS 3-14 Record Reference Manual
Philip Stanley, Janet Anderson, Marty Kraimer
Wikified by Andrew Johnson and Kazimierz Gofron
- aai - Array Analog Input
- aao - Array Analog Output
- ai - Analog Input
- ao - Analog Output
- aSub - Array Subroutine
- bi - Binary Input
- bo - Binary Output
- calc - Calculation
- calcout - Calculation Output
- compress - Compression
- dfanout - Data Fanout
- event - Event
- fanout - Fanout
- histogram - Histogram
- longin - Long Input
- longout - Long Output
- mbbi - Multi-Bit Binary Input
- mbbiDirect - Multi-Bit Binary Input Direct
- mbbo - Multi-Bit Binary Output
- mbboDirect - Multi-Bit Binary Output Direct
- permissive - Permissive
- sel - Select
- seq - Sequence
- state - State
- stringin - String Input
- stringout - String Output
- subArray - Sub-Array
- sub - Subroutine
- waveform - Waveform
Record Types Not in Base
- archive - Archive
- asyn
- cpid - CPID Control
- pid - PID Control
- pulseCounter - Pulse Counter
- pulseDelay - Pulse Delay
- pulseTrain - Pulse Train
- scan - Scan
- steppermotor - Stepper Motor
- timer - Timer
- wait - Wait
- synApps records
- alive
- acalcout Array Calculation Output
- busy Signal put_callback() completion
- camac Generic CAMAC Record
- digitel Vacuum controller
- dxp
- epid Enhanced PID
- mca Multichannel analyzer, multichannel scaler
- motor Stepper and servo motor
- scalcout String Calculation Output
- scaler Multibank counter
- sscan Set conditions, trigger detectors, record data, write data files
- scanparm One-button scan
- sseq String sequence
- swait Calcout variant
- table Optical table
- transform Calc variant
- vme Generic VME access
- vs Vacuum sensor
