|
|
| (10 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| Background
| | moved, see: |
|
| |
|
| Specific mail-in samples (for example air sensitive material) may require the use of additional glass or fused quartz capillary tubes. Any additional capillary must fit and be secured inside the supplied Kapton tube.
| | https://wiki-ext.aps.anl.gov/ug11bm/index.php/Nesting_Glass/Quartz_Capillaries_in_Kapton_Tubes |
| | |
| Sample preparation instructions for his are shown below, and can be downloaded as a [[http://11bm.xor.aps.anl.gov/documents/11BM_SamplePrepNestedCapillaryKapton.pdf .pdf file]].
| |
| | |
| Note: 11-BM does not provide glass or quartz capillaries for mail-in experiments. Only Kapton tubes (with an inner diameter of 0.81 mm) are provided for the mail-in service. Please see the wiki page on [https://wiki-ext.aps.anl.gov/ug11bm/index.php/Capillary_Tubes Glass & Quartz Capillary Tubes] for more info.
| |
| | |
| [[image:NestCapInKaptonImage_1.png|300px|Image 1]]
| |
| | |
| [[image:NestCapInKaptonImage_2.png|300px|Image 2]]
| |
| | |
| [[image:NestCapInKaptonImage_3.png|300px|Image 3]]
| |
| | |
| [[image:NestCapInKaptonImage_4.png|300px|Image 4]]
| |
| | |
| [[image:NestCapInKaptonImage_5.png|300px|Image 5]]
| |
| | |
| [[image:NestCapInKaptonImage_6.png|300px|Image 6]]
| |
| | |
| [[image:NestCapInKaptonImage_8.png|300px|Image 8]]
| |
| | |
| [[image:NestCapInKaptonImage_9.png|300px|Image 9]]
| |
| | |
| [[image:NestCapInKaptonImage_10.png|300px|Image 10]]
| |
| | |
| | |
| Load well ground powder inside glass or fused quartz capillary. Capillary with diameter of 0.5 mm will easily fit side supplied Kapton tube. (Capillary with diameter of 0.7 mm might fit if care is taken with sealing)
| |
Latest revision as of 19:12, 9 October 2012
