Difference between revisions of "Mail-In Bases"

From Ug11bm
Jump to navigationJump to search
Line 7: Line 7:
The Large size is a ~ 2x larger diameter (~ 3x increase in scattering cross section) when compared with the standard 0.8 mm diameter Kapton tube capillary.  These larger capillaries are allow users with low Z, or low X-ray scattering, samples to place more sample into the beam during the measurements.  More scattering events normally gives higher quality data with better statistics.
The Large size is a ~ 2x larger diameter (~ 3x increase in scattering cross section) when compared with the standard 0.8 mm diameter Kapton tube capillary.  These larger capillaries are allow users with low Z, or low X-ray scattering, samples to place more sample into the beam during the measurements.  More scattering events normally gives higher quality data with better statistics.


Users should consider the [https://wiki-ext.aps.anl.gov/ug11bm/index.php/Samples_with_Strong_X-Ray_Absorption#Guidelines_for_11-BM_Mail-In_Samples μ*r of their sample(s)].  
[https://wiki-ext.aps.anl.gov/ug11bm/index.php/Samples_with_Strong_X-Ray_Absorption#Guidelines_for_11-BM_Mail-In_Samples Users should consider the μ*r of their sample(s)]. An ideal μ*r value is ~ 1.0
 
An ideal μ*r value is ~ 1.0


More info will be placed here soon.  
More info will be placed here soon.  


Please ask 11-BM staff ([email protected]) with any questions about which size is correct for your experiment.
Please ask 11-BM staff ([email protected]) with any questions about which size is correct for your experiment.

Revision as of 22:53, 29 April 2013

Users can now select 2 sizes of sample mounting bases:

  • Standard bases: 0.8 mm diameter capillary. This is the standard size used for all mail-in measurements prior to 2013.
  • Large bases: 1.5 mm diameter capillary. New for 2013

The Large size is a ~ 2x larger diameter (~ 3x increase in scattering cross section) when compared with the standard 0.8 mm diameter Kapton tube capillary. These larger capillaries are allow users with low Z, or low X-ray scattering, samples to place more sample into the beam during the measurements. More scattering events normally gives higher quality data with better statistics.

Users should consider the μ*r of their sample(s). An ideal μ*r value is ~ 1.0

More info will be placed here soon.

Please ask 11-BM staff ([email protected]) with any questions about which size is correct for your experiment.