Difference between revisions of "Capillary Tubes"

From Ug11bm
Jump to navigationJump to search
Line 1: Line 1:
=== Mail-in Users  ===
Specific mail-in samples (for example air sensitive material) may require the use of additional glass or fused quartz capillary tubes.  Any additional capillary must fit and be secured inside the supplied Kapton tube.
11-BM does '''not''' provide glass or quartz capillaries for mail-in experiments.  Only Kapton tubes (with an inner diameter of 0.81 mm) are provided for the mail-in service.
Users are referred to the following vendors in the USA for capillaries:


Charles-Supper
Charles-Supper
http://www.charles-supper.com/en/page/category.cfm?idCategory=13
http://www.charles-supper.com/en/page/category.cfm?idCategory=13


or


Hampton Research
Hampton Research
http://hamptonresearch.com/menus.aspx?id=3&sid=110
http://hamptonresearch.com/menus.aspx?id=3&sid=110
the 0.5 mm (always) and the 0.7 mm (sometimes) diameter capillaries fit inside the standard Kapton tubes supplied by 11-BM for mail-in samples.  The Kapton tubes have a ID of 0.81 mm.  The precision of the glass or quartz capillaries is sometimes poor, so the 0.7 can be tight fit, but usually work.
When returning samples loaded in glass capillaries, please leave a note in the package so we be sure to take extra care when handling.
best regards
Matthew




Line 12: Line 30:




=== Sample Position Number Diagrams ===
=== On-Site Users ===
One can mount 56 samples individual posts plus 6 magazines of 16 samples each (152 total samples).


A section of Kapton, Glass and fused Quartz capillary tubes are available at 11-BM for on-site experiments. Check with staff to confirm, but the materials and dimensions shown below are typically on hand.
A section of Kapton, Glass and fused Quartz capillary tubes are available at 11-BM for on-site experiments. Check with staff to confirm, but the materials and dimensions shown below are typically on hand.

Revision as of 22:07, 16 September 2011

Mail-in Users

Specific mail-in samples (for example air sensitive material) may require the use of additional glass or fused quartz capillary tubes. Any additional capillary must fit and be secured inside the supplied Kapton tube.

11-BM does not provide glass or quartz capillaries for mail-in experiments. Only Kapton tubes (with an inner diameter of 0.81 mm) are provided for the mail-in service.

Users are referred to the following vendors in the USA for capillaries:

Charles-Supper http://www.charles-supper.com/en/page/category.cfm?idCategory=13

or

Hampton Research http://hamptonresearch.com/menus.aspx?id=3&sid=110


the 0.5 mm (always) and the 0.7 mm (sometimes) diameter capillaries fit inside the standard Kapton tubes supplied by 11-BM for mail-in samples. The Kapton tubes have a ID of 0.81 mm. The precision of the glass or quartz capillaries is sometimes poor, so the 0.7 can be tight fit, but usually work.

When returning samples loaded in glass capillaries, please leave a note in the package so we be sure to take extra care when handling.

best regards Matthew



Capillary Tubes available at 11-BM for on-site experiments


On-Site Users

A section of Kapton, Glass and fused Quartz capillary tubes are available at 11-BM for on-site experiments. Check with staff to confirm, but the materials and dimensions shown below are typically on hand.

11BMCapillaryTubing.png

File:11BMCapillaryTubing Stock.pdf