Hazards

see http://11bm.xor.aps.anl.gov/hazardlinks.html for more info...

Mail-in Measurments

The mail-in service cannot accept any of the following sample types:

• Biohazards (definition)
• Human-Derived Materials (definition)
• Radioactive Materials (definition)
• Non-Sterilized Regulated Soils (definition)
• Explosives or Unstable Materials (definition)

Note: we are also unable to accept materials that possesses more than one of the following hazards: flammable, corrosive or oxidizer. RCRA regulated metals (the heavy metals Ag, As, Ba, Cd, Cr, Hg, Pb and Se) can be accepted, but samples containing them must be identified.

Additionally, all registered samples shipped to the APS must qualify for small quantity exceptions under U.S. Dept. of Transportation (DOT) regulations (CFR Title 49 § 173.4).

Please take special care to ensure that samples potentially hazardous to beamline staff (Nano, Toxic, Carcinogenic, Flammable, etc) are securely contained and permanently sealed in the Kapton tubes.

Inquire about special sized sample mounting bases and double nesting Kapton tubes if your permissible samples are particularly hazardous or air sensitive.

On-Site Experiments

Please complete your ESAF ~ 2 weeks prior to the start of the experiment.