Difference between revisions of "Hot Gas Blower (Cyberstar)"
From Ug11bm
Jump to navigationJump to search| Line 23: | Line 23: | ||
== Temperature Calibration == | == Temperature Calibration == | ||
=== Al2O3 & Pt Thermal Expansion === | === Al2O3 & Pt Thermal Expansion === | ||
J. Appl. Cryst. (1993). 26, 77-81 [ doi:10.1107/S002188989200877X ] | |||
"High-temperature X-ray diffraction: solutions to uncertainties in temperature and sample position" | |||
N. E. Brown, S. M. Swapp, C. L. Bennett and A. Navrotsky | |||
dfdfdf | dfdfdf | ||
Revision as of 18:34, 24 September 2012
About
11-BM has a dedicated Cyberstar Hot Gas Blower. This can be used to heat small diameter capillary samples from ambient temperature to ~ 950 °C
About
Temperature Range and Ramp Rate.
- ambient temperature to ~ 950 °C
- Max ramp rate on heating & cooling is 5 deg C/min (300 C/hour)
Users should plan experiments to incorporate these heating and cooling ramp times.
11-BM Hot Gas Blower Image
Temperature Profile & Alignment
Temperature Calibration
Al2O3 & Pt Thermal Expansion
J. Appl. Cryst. (1993). 26, 77-81 [ doi:10.1107/S002188989200877X ] "High-temperature X-ray diffraction: solutions to uncertainties in temperature and sample position" N. E. Brown, S. M. Swapp, C. L. Bennett and A. Navrotsky
dfdfdf
Phase Transitions
SiO2
PbTiO3
