|
|
Line 1: |
Line 1: |
| == Capillaries: Kapton ==
| | see https://wiki-ext.aps.anl.gov/ug11bm/index.php/Supplies_and_Tools |
| | |
| | |
| Kapton is a polyimide film developed by DuPont which is stable in a wide range of temperatures, from −273 to +400 C. ([http://en.wikipedia.org/wiki/Kapton more property details])
| |
| | |
| 11-Bm has used the following suppliers for Kapton tubing:
| |
| | |
| *MicroLumen, Inc. (http://www.microlumen.com/)
| |
| *Cole-Parmer (http://www.coleparmer.com/catalog/product_index.asp?cls=6806)
| |
| | |
| The MicroLumen company can make almost any size you need, and is happy to send samples as well. Cole Parmer has a list of different available sizes on the webpage, and you might be able to find the Cole-Parmer brand on Fisher Scientific or a similar supply company.
| |
| | |
| == Capillaries: Thin Wall Glass and Fused Quartz ==
| |
| | |
| Thin wall glass or fused quartz capillaries are often used in powder diffraction experiments.
| |
| | |
| These are available from several vendors such as:
| |
| | |
| * Charles-Supper [http://www.charles-supper.com/en/page/category.cfm?idCategory=13 http://www.charles-supper.com]
| |
| * Hampton Research [http://hamptonresearch.com/menus.aspx?id=3&sid=110 http://hamptonresearch.com]
| |
| | |
| Typical both glass ('special' or 'borosilicate') or fused (amorphous) quartz capillaries are available.
| |
| | |
| As purchased from both vendors above, the tubes are pre-sealed on one end, and have a flared opening on the other end for easy powder loading.
| |
| | |
| When selecting a capillary material and size, consider your experiment and sample(s).
| |
| | |
| Glass and quartz are stable over different temperature ranges. Glass adds a lower background to a diffraction pattern and is easier to seal with a flame (you can use Bic style lighter), but fused quartz tubes are stronger, more chemical resistant, and more likely to survive shipping and handling.
| |
| | |
| Smaller diameter capillaries (e.g 0.3 mm) may be useful to lower [https://wiki-ext.aps.anl.gov/ug11bm/index.php/X-ray_absorption_%26_fluorescence X-ray absorption.
| |
| | |
| | |
| | |
| == Drill Bits ==
| |
| A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in 0.8 mm Kapton tubes
| |
| | |
| These small diameter drill bits cost $2 or less, and can easily be purchased online. If you intend to use it frequently, you might consider also purchasing a small pin vise (Starrett makes good ones) to more easily hold the small bit.
| |
| | |
| == Powder Sieves ==
| |
| 11-BM has a selection of powder sieves available for use by on-site users.
| |
| | |
| Small and large agate mortars and pestles are also available for grinding powders.
| |
| | |
| The available sieve sizes are as follows.
| |
| {| class="wikitable"
| |
| ! Sieve #
| |
| ! Mesh (microns)
| |
| |-
| |
| | 40
| |
| | 425 μm
| |
| |-
| |
| | 70
| |
| | 212 μm
| |
| |-
| |
| | 140
| |
| | 106 μm
| |
| |-
| |
| | 200
| |
| | 75 μm
| |
| |-
| |
| | 325
| |
| | 45 μm
| |
| |}
| |
| | |
| | |
| | |
| == Mortar and Pestle ==
| |
| | |
| An agate mortar and pestle is an invaluable tool for grinding powder samples. Can you used with dry or wet powders. 11-BM has a selection of mortar and pestles available for use by on-site users at the beamline.
| |
| | |
| == more tools.. ==
| |