Difference between revisions of "Equipment and Tools"
From Ug11bm
Jump to navigationJump to search (Created page with "== Tools == === Drill Bits === A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in...") |
|||
Line 1: | Line 1: | ||
== Drill Bits == | |||
A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in 0.8 mm Kapton tubes | A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in 0.8 mm Kapton tubes | ||
These small diameter drill bits cost $2 or less, and can easily be purchased online. If you intend to use it frequently, you might consider also purchasing a small pin vise (Starrett makes good ones) to more easily hold the small bit. | These small diameter drill bits cost $2 or less, and can easily be purchased online. If you intend to use it frequently, you might consider also purchasing a small pin vise (Starrett makes good ones) to more easily hold the small bit. | ||
== Powder Sieves == | |||
11-BM has a selection of powder sieves available for use by on-site users. | 11-BM has a selection of powder sieves available for use by on-site users. | ||
Line 31: | Line 29: | ||
| 45 μm | | 45 μm | ||
|} | |} | ||
== tool 1 == | |||
== tool 2 == |
Revision as of 16:04, 30 May 2012
Drill Bits
A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in 0.8 mm Kapton tubes
These small diameter drill bits cost $2 or less, and can easily be purchased online. If you intend to use it frequently, you might consider also purchasing a small pin vise (Starrett makes good ones) to more easily hold the small bit.
Powder Sieves
11-BM has a selection of powder sieves available for use by on-site users.
Small and large agate mortars and pestles are also available for grinding powders.
The available sieve sizes are as follows.
Sieve # | Mesh (microns) |
---|---|
40 | 425 μm |
70 | 212 μm |
140 | 106 μm |
200 | 75 μm |
325 | 45 μm |