|
|
| (7 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| == Drill Bits ==
| | see https://wiki-ext.aps.anl.gov/ug11bm/index.php/Supplies_and_Tools |
| A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in 0.8 mm Kapton tubes
| |
| | |
| These small diameter drill bits cost $2 or less, and can easily be purchased online. If you intend to use it frequently, you might consider also purchasing a small pin vise (Starrett makes good ones) to more easily hold the small bit.
| |
| | |
| == Powder Sieves ==
| |
| 11-BM has a selection of powder sieves available for use by on-site users.
| |
| | |
| Small and large agate mortars and pestles are also available for grinding powders.
| |
| | |
| The available sieve sizes are as follows.
| |
| {| class="wikitable"
| |
| ! Sieve #
| |
| ! Mesh (microns)
| |
| |-
| |
| | 40
| |
| | 425 μm
| |
| |-
| |
| | 70
| |
| | 212 μm
| |
| |-
| |
| | 140
| |
| | 106 μm
| |
| |-
| |
| | 200
| |
| | 75 μm
| |
| |-
| |
| | 325
| |
| | 45 μm
| |
| |}
| |
| | |
| | |
| | |
| == tool 1 ==
| |
| | |
| == tool 2 ==
| |
Latest revision as of 17:51, 30 May 2012
