Difference between revisions of "Equipment and Tools"

From Ug11bm
Jump to navigationJump to search
(Created page with "== Tools == === Drill Bits === A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in...")
 
(Replaced content with "see https://wiki-ext.aps.anl.gov/ug11bm/index.php/Supplies_and_Tools")
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Tools ==
see https://wiki-ext.aps.anl.gov/ug11bm/index.php/Supplies_and_Tools
 
=== Drill Bits ===
A #68 wire gauge size Jobber drill bit (diameter = 0.031" = 0.787 mm) can be useful for loading & packing powder inside the standard 11-BM mail-in 0.8 mm Kapton tubes
 
These small diameter drill bits cost $2 or less, and can easily be purchased online. If you intend to use it frequently, you might consider also purchasing a small pin vise (Starrett makes good ones) to more easily hold the small bit.
 
=== Powder Sieves ===
11-BM has a selection of powder sieves available for use by on-site users.
 
Small and large agate mortars and pestles are also available for grinding powders.
 
The available sieve sizes are as follows.
{| class="wikitable"
! Sieve #
! Mesh (microns)
|-
| 40
| 425 μm
|-
| 70
| 212 μm
|-
| 140
| 106 μm
|-
| 200
| 75 μm
|-
| 325
| 45 μm
|}

Latest revision as of 17:51, 30 May 2012

see https://wiki-ext.aps.anl.gov/ug11bm/index.php/Supplies_and_Tools

Retrieved from "https://wiki-ext.aps.anl.gov/ug11bm/index.php?title=Equipment_and_Tools&oldid=699"