Difference between revisions of "X-ray absorption & fluorescence"
| (12 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
== X-Ray Absorption == | == X-Ray Absorption == | ||
For more info, see the X-ray Absorption Information ( | For more info, see the X-ray Absorption Information (11-BM site): | ||
http://11bm. | |||
http://11bm.xray.aps.anl.gov/absorption.html | |||
For more practical info about strongly absorbing samples see this wiki page: | |||
https://wiki-ext.aps.anl.gov/ug11bm/index.php/Samples_with_Strong_X-Ray_Absorption | |||
=== Absorption Length === | === Absorption Length === | ||
| Line 8: | Line 14: | ||
I(x) = Io e^(-mu * x) | I(x) = Io e^(-mu * x) | ||
The attenuation coefficient ''mu'' is typical given in inverse length units of 1/cm, and is a function of the incident wavelength, material chemistry and density. It can be calculated or estimated using the | The attenuation coefficient ''mu'' is typical given in inverse length units of 1/cm, and is a function of the incident wavelength, material chemistry and density. It can be calculated or estimated using resources below. | ||
The ''Absorption Length'' (or ''Attenuation Length'') is defined as the distance into a material where the x-ray beam intensity has decreased to a value of ''1/e'' (~ 40%) of the incident beam intensity (''Io''). | |||
Recall that Euler's number ''e'' = 2.72. | |||
This is a convenient description, as absorption length ''x'' = 1/mu, as shown below: | This is a convenient description, as absorption length ''x'' = 1/mu, as shown below: | ||
| Line 24: | Line 32: | ||
as a simple example, consider a solid Nickel metal sample at room temperature probed by X-rays of energy = 30 KeV (Lambda = 0.41 A). | as a simple example, consider a solid Nickel metal sample at room temperature probed by X-rays of energy = 30 KeV (Lambda = 0.41 A). | ||
For Ni with density = 8.908 g*cm-3, we can calculate that ''mu'' ~ 85.0 cm-1. | For Ni with density = 8.908 g*cm-3, we can calculate (using resources below) that ''mu'' ~ 85.0 cm-1. | ||
Then absorption length ''x'' = 1/85 = 0.011 cm = 110 microns. | Then absorption length ''x'' = 1/85 = 0.011 cm = 110 microns. | ||
| Line 34: | Line 42: | ||
Since ''mu'' = 85 cm-1, then ''mu*R'' = 0.935, therefore the % total incident x-rays transmitted through the sample is = e^(-2*muR) = ~ 40% | Since ''mu'' = 85 cm-1, then ''mu*R'' = 0.935, therefore the % total incident x-rays transmitted through the sample is = e^(-2*muR) = ~ 40% | ||
In general, a ''mu*R'' of ~ 1.0 is desired for capillary transmission x-ray samples. | |||
== Web Resources == | == Web Resources == | ||
=== WebAbsorb === | === WebAbsorb === | ||
a web based calculator to estimate X-ray absorption for powder XRD capillary samples (11BM page) | a web based calculator to estimate X-ray absorption for powder XRD capillary samples (11BM page) | ||
http://11bm. | http://11bm.xray.aps.anl.gov/absorb/absorb.php | ||
===MuCal === | ===MuCal === | ||
| Line 51: | Line 59: | ||
downloaded both here: | downloaded both here: | ||
https://subversion. | https://subversion.xray.aps.anl.gov/trac/pyFprime/ | ||
=== Fprime === | === Fprime === | ||
| Line 57: | Line 65: | ||
=== Absorb === | === Absorb === | ||
computes scattering and absorption for a given composition and makes an attempt to estimate density as well. WebAbsorb provides a web based utility based on this program (see http://11bm. | computes scattering and absorption for a given composition and makes an attempt to estimate density as well. WebAbsorb provides a web based utility based on this program (see http://11bm.xray.aps.anl.gov/absorb/absorb.php). | ||
Latest revision as of 00:32, 22 February 2014
X-Ray Absorption
For more info, see the X-ray Absorption Information (11-BM site):
http://11bm.xray.aps.anl.gov/absorption.html
For more practical info about strongly absorbing samples see this wiki page:
https://wiki-ext.aps.anl.gov/ug11bm/index.php/Samples_with_Strong_X-Ray_Absorption
Absorption Length
The X-ray beam intensity I(x) at depth x in a material is a function of the attenuation coefficient mu, and can be calculated by the Beer-Lambert law:
I(x) = Io e^(-mu * x)
The attenuation coefficient mu is typical given in inverse length units of 1/cm, and is a function of the incident wavelength, material chemistry and density. It can be calculated or estimated using resources below.
The Absorption Length (or Attenuation Length) is defined as the distance into a material where the x-ray beam intensity has decreased to a value of 1/e (~ 40%) of the incident beam intensity (Io).
Recall that Euler's number e = 2.72.
This is a convenient description, as absorption length x = 1/mu, as shown below:
(1/e) = e^(-mu * x) ln(1/e) = ln(e^(-mu * x)) 1 = mu * x x = 1/mu
as a simple example, consider a solid Nickel metal sample at room temperature probed by X-rays of energy = 30 KeV (Lambda = 0.41 A).
For Ni with density = 8.908 g*cm-3, we can calculate (using resources below) that mu ~ 85.0 cm-1.
Then absorption length x = 1/85 = 0.011 cm = 110 microns.
Capillary Transmission
Continuing with the above example for capillary transmission X-ray diffraction experiments, we can consider a cylindrically shaped solid Nickel metal sample of radius R = 0.055 mm (or 0.0055 cm). The diameter of this sample is then 2*R = 0.011 cm (see absorption length above)
Since mu = 85 cm-1, then mu*R = 0.935, therefore the % total incident x-rays transmitted through the sample is = e^(-2*muR) = ~ 40%
In general, a mu*R of ~ 1.0 is desired for capillary transmission x-ray samples.
Web Resources
WebAbsorb
a web based calculator to estimate X-ray absorption for powder XRD capillary samples (11BM page) http://11bm.xray.aps.anl.gov/absorb/absorb.php
MuCal
calculate X-ray absorption, fluorescence and more (by C. Segre @ IIT/ANL) http://csrri.iit.edu/mucal.html
Software
The two python GUI programs described below compute approximate x-ray scattering cross sections (f, f' and f") for individual elements using the Cromer & Liberman algorithm.
downloaded both here:
https://subversion.xray.aps.anl.gov/trac/pyFprime/
Fprime
computes and plots elemental scattering factors.
Absorb
computes scattering and absorption for a given composition and makes an attempt to estimate density as well. WebAbsorb provides a web based utility based on this program (see http://11bm.xray.aps.anl.gov/absorb/absorb.php).
