Cartridge printing
From SRS_mail-in
Revision as of 22:40, 18 February 2020 by Gallington (talk | contribs) (Created page with "Sample holders and lids for the mail-in program at 11-ID-B and 17-BM are printed by AES. Additional cartridges can be made by submitting an "APS - Design and Drafting Prototyp...")
Sample holders and lids for the mail-in program at 11-ID-B and 17-BM are printed by AES. Additional cartridges can be made by submitting an "APS - Design and Drafting Prototyping Request" in Vector. Below is the information AES needs to print the cartridges at the correct size. Note that you will need to attach the relevant .stl files to your request. Only request one type of part per Vector request.
cartridge
short description: capillary sample holder request description: capillary sample holder for 11-ID-B; please print the sample changer "standing up" material: Clear quantity: 10 file name: Holder20_mk8.stl scale: Full units: Millimeters longest reference dimension: 72 mm What will the part be used for? These parts will be used as sample holders for 1.1 mm kapton capillaries. The "lego" style base will snap onto the "lego" style mount at the beamline.
cap
short description: cap for sample holder request description: lid for capillary sample holder for 11-ID-B material: Clear quantity: 10 file name: Cap20_mk7.stl scale: Full units: Millimeters longest reference dimension: 70.85 mm What will the part be used for? These parts will be used as lids for capillary sample holders at 11-ID-B. They will be secured to the sample holders with rubber bands.
