34ID Beamline Layout

From 34-ID-E
Revision as of 22:47, 22 August 2013 by Ruqingxu (talk | contribs) (→‎34ID-A)
Jump to navigationJump to search
(This article/section is incomplete, please check back again or help expanding it)

34ID-layout-topview.png

↑ top view
Storage Ring Tunnel Wall — ♦ 34ID-A (FOE) Beam transport 34ID-B (SOE) 34ID-C 34ID-D (TOE) 34ID-E
↓ side view

34ID-layout-insideview.png

Sector 34ID has two undulator sources and five x-ray enclosures (also called hutches or stations): the first optical enclosure (FOE) 34ID-A, the second optical enclosure (SOE) 34ID-B, the coherent diffraction imaging experiment station 34ID-C, the third optical enclosure (TOE) 34ID-D, and the micro-diffraction station 34ID-E.

Undulator Sources

34ID has two undulators, positioned in tandem along a 5-meter straight section along the ring. Their horizontal directions are separated by 1 μrad. The upstream undulator produces the outboard beam, which eventually goes to 34ID-C for coherent diffraction imaging experiments. The downstream undulator produces the inboard beam that serves micro-diffraction at the E-hutch.

34ID-A

The first optical enclosure has the following components:

  • Front-end exit mask, window, and collimator
  • Two sets of white-beam slits, one for each x-ray beam
  • A few Bremsstrahlung Collimators
  • A white-beam deflection mirror that further deflects the 34ID-C beam by 5 mrad in the outboard direction. This mirror would provide enough separation between the two x-ray beams at the C-station so experiments can be performed there without too much spatial constraints
  • A white-beam mask/stop for the outboard deflected/transmitted beam

34ID-B

34ID-C

34ID-D

34ID-E

See Also