Difference between revisions of "34ID Beamline Layout"

From 34-ID-E
Jump to navigationJump to search
 
(4 intermediate revisions by the same user not shown)
Line 27: Line 27:


== 34ID-A ==
== 34ID-A ==
The first optical enclosure has the following components:
* Front-end exit mask, window, and collimator
* Two sets of white-beam slits, one for each x-ray beam
* A few Bremsstrahlung Collimators
* A white-beam deflection mirror that further deflects the 34ID-C beam by 10 mrad in the outboard direction. The deflection would provide enough separation between the two x-ray beams at the C-station so experiments can be performed there without too much spatial constraints
* A white-beam mask/stop for the outboard deflected/transmitted beam


== 34ID-B ==
== 34ID-B ==
The second optical enclosure:
* Septum mask at the entrance that separates beam path into two independent pipes
* A monochromator, a polarizer, and a shutter in the outboard beam for C-hutch
== 34ID-C ==
== 34ID-C ==
* X-ray coherent-diffraction imaging experiment hutch, uses the outboard beam
* Beam transfer pipe for the inboard beam that goes to 34ID-E
The outboard beam stops at the end of this hutch.
== 34ID-D ==
== 34ID-D ==
The third optical enclosure:
* Monochromator and slits for the inboard beam
* White-beam shutter and mono-beam shutter for the inboard beam
== 34ID-E ==
== 34ID-E ==
The micro-diffraction experiment hutch
== See Also ==
== See Also ==

Latest revision as of 21:47, 18 October 2013

(This article/section is incomplete, please check back again or help expanding it)

34ID-layout-topview.png

↑ top view
Storage Ring Tunnel Wall — ♦ 34ID-A (FOE) Beam transport 34ID-B (SOE) 34ID-C 34ID-D (TOE) 34ID-E
↓ side view

34ID-layout-insideview.png

Sector 34ID has two undulator sources and five x-ray enclosures (also called hutches or stations): the first optical enclosure (FOE) 34ID-A, the second optical enclosure (SOE) 34ID-B, the coherent diffraction imaging experiment station 34ID-C, the third optical enclosure (TOE) 34ID-D, and the micro-diffraction station 34ID-E.

Undulator Sources

34ID has two undulators, positioned in tandem along a 5-meter straight section along the ring. Their horizontal directions are separated by 1 μrad. The upstream undulator produces the outboard beam, which eventually goes to 34ID-C for coherent diffraction imaging experiments. The downstream undulator produces the inboard beam that serves micro-diffraction at the E-hutch.

34ID-A

The first optical enclosure has the following components:

  • Front-end exit mask, window, and collimator
  • Two sets of white-beam slits, one for each x-ray beam
  • A few Bremsstrahlung Collimators
  • A white-beam deflection mirror that further deflects the 34ID-C beam by 10 mrad in the outboard direction. The deflection would provide enough separation between the two x-ray beams at the C-station so experiments can be performed there without too much spatial constraints
  • A white-beam mask/stop for the outboard deflected/transmitted beam

34ID-B

The second optical enclosure:

  • Septum mask at the entrance that separates beam path into two independent pipes
  • A monochromator, a polarizer, and a shutter in the outboard beam for C-hutch

34ID-C

  • X-ray coherent-diffraction imaging experiment hutch, uses the outboard beam
  • Beam transfer pipe for the inboard beam that goes to 34ID-E

The outboard beam stops at the end of this hutch.

34ID-D

The third optical enclosure:

  • Monochromator and slits for the inboard beam
  • White-beam shutter and mono-beam shutter for the inboard beam

34ID-E

The micro-diffraction experiment hutch

See Also