34-ID-E

From 34-ID-E
Revision as of 22:00, 13 August 2013 by Ruqingxu (talk | contribs)
Jump to navigationJump to search


Welcome to 34ID-E Wiki.

Contacts:

Overview

34ide-outview.jpg

34ID-E is an undulator beamline dedicated to x-ray micro/nano-diffraction activities at the Advanced Photon Source (APS).

The x-ray micro/nano-diffraction facility focuses x-ray beam to smaller than 0.5μm × 0.5μm for use in diffraction techniques using Kirkpatrick-Baez (K-B) mirrors. A specially designed micro-monochromator allows the selection of either polychromatic or monochromatic conditions with a fixed focal spot on the sample.

Polychromatic x-ray microscopy utilizes Laue diffraction method to characterize crystalline structure in materials. By scanning a differential aperture, spatially resolved microdiffraction measurements can be made in all three dimensions with sub-μm resolution. Properties that can be measured include the local crystalline phase, local texture (orientation), and the local strains.

34ID-E is part of Sector 34ID, which has, after a canting upgrade in 2011, two independently-operated undulators placed in tandem along the ring. X-rays generated by them are horizontally separated. 34ID-E takes the inboard beam, while the outboard beam goes into 34ID-C for coherent diffraction imaging experiments.

The development of the microbeam experimental capabilities were sponsored by the DOE Office of Science.

Instruments

Beam Parameters
Source Type Undulator A, 3.3 cm
Energy Range 7 - 30 keV
Beam Size 300 - 500 nm (H)
300 - 700 nm (V)
Energy Resolution (ΔE/E) 1 × 10-4
Beam Flux (photons/sec) 1 × 1011 (white)
1 × 109 (mono)
34ide-diagram-topleft.png Detectors
Main Articles:
34ide-diagram-left.png 34ide-diagram-right.png Undulator
Source
Differential Aperture Focusing Mirrors Removable
Monochromator
empty cell


General Info

Beamline Control

Data Analysis

  • Analysis and visualization are mostly done with LaueGo, a package developed at 34ID-E based on IGOR Pro, runs on any PC or Mac.
  • Data from depth-resolved measurements requires reconstruction, which is carried out by a multi-node Linux cluster at APS.


External Links