34-ID-E

From 34-ID-E
Revision as of 20:14, 9 August 2013 by Ruqingxu (talk | contribs)
Jump to navigationJump to search


Welcome to 34ID-E Wiki.

Overview

34ID-E is an undulator beamline dedicated to x-ray micro/nano-diffraction activities at the Advanced Photon Source (APS).

The x-ray micro/nano-diffraction facility focuses x-ray beam to smaller than 0.5μm × 0.5μm for use in diffraction techniques using Kirkpatrick-Baez (K-B) mirrors. A specially designed micro-monochromator allows the selection of either polychromatic or monochromatic conditions with a fixed focal spot on the sample.

Polychromatic x-ray microscopy utilizes Laue diffraction method to characterize crystalline structure in materials. By scanning a differential aperture, spatially resolved microdiffraction measurements can be made in all three dimensions with sub-μm resolution. Properties that can be measured include the local crystalline phase, local texture (orientation), and the local strains.

34ID-E is part of Sector 34ID, which has, after a canting upgrade in 2011, two independently-operated undulators placed in tandem along the ring. X-rays generated by them are horizontally separated. 34ID-E takes the inboard beam, while the outboard beam goes into 34ID-C for coherent diffraction imaging experiments.

The development of the microbeam experimental capabilities were sponsored by the DOE Office of Science.

Beam Parameters
Source Type Undulator A, 3.3 cm period, 2.2 m
Energy Range 7 - 30 keV
Beam Size 300 - 500 nm (H) × 300 - 700 nm (V)
Energy Resolution (ΔE/E) 1 × 10-4
Beam Flux (photons/sec) 1 × 1011 (white)
1 × 109 (mono)
Contacts


 (Beamline Diagram to be placed here)

Instruments


Miscellaneous

Beamline Control

Data Analysis

  • Analysis and visualization are mostly done with LaueGo, a package developed at 34ID-E based on IGOR Pro, runs on any PC or Mac.
  • Data from depth-resolved measurements requires reconstruction, which is carried out by a multi-node Linux cluster at APS.


External Links