Imaging optics module (IOM)

From 26-ID
Revision as of 15:20, 14 April 2009 by Vrose (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Back to X-Ray Microscopy

Zone plate and phase ring holder for full-field imaging mode

Zone plate

Objective in:
Objective X =-1114.9
Objective Y =-878.8
Objective Z =803.3
(RW 4/9/09)

Phase rings

The phase ring holder has space for three different phase rings to match the condenser illumination at 8-10 keV.

Position Phase Ring X Phase Ring Y Phase Ring Z
1 - - -
2 - - -
3 - - -

Phase ring specs.jpg


In order to use this module the focusing optics module (FOM) has to be set to a through hole. A condenser is aligned using the condenser Module (CM).