Imaging optics module (IOM)
From 26-ID
Revision as of 22:15, 9 January 2014 by Ktietz (talk | contribs) (Created page with "Back to X-Ray Microscopy thumb|Zone plate and phase ring holder for full-field imaging mode ===Zone plate=== '''Objective in:'''<br /> Objective X =...")
Back to X-Ray Microscopy
Zone plate
Objective in:
Objective X =-1114.9
Objective Y =-878.8
Objective Z =803.3
(RW 4/9/09)
Phase rings
The phase ring holder has space for three different phase rings to match the condenser illumination at 8-10 keV.
| Position | Phase Ring X | Phase Ring Y | Phase Ring Z | |
| 1 | - | - | - | |
| 2 | - | - | - | |
| 3 | - | - | - |
In order to use this module the focusing optics module (FOM) has to be set to a through hole. A condenser is aligned using the condenser Module (CM).
