Difference between revisions of "Focusing optics module (FOM)"

From 26-ID
Jump to navigationJump to search
(No difference)

Revision as of 20:11, 2 February 2010

Back to X-Ray Microscopy

[1]

Zone plate holder; upstream view
Zone plate holder; side view

10 keV

Position ZP name Focus X Focus Y Focus Z OSA X OSA Y OSA Z OSA # Remarks
1 - - - - - -
2 ZP24-133-6 110 2787 1830 -17.76 -1548.8 -1409 #1 June 12, MH
3 ZP50-240-9 -3687 2851 - 3814 -1614 - #1 June 12, MH
4 - 3714 -1193 - - - - -
5 ZP24-133-3 45 -1268 1845 62.36 2510.6 -1409 #1 June 12, MH
6 -4000 -1554 1845 - - - -
7 - - - - - - -

11.2 keV

Position ZP name Focus X Focus Y Focus Z OSA X OSA Y OSA Z OSA # Remarks
1 - - - - - -
2 ZP24-133-6 110 2787 -1295 -17.76 -1548.8 500 #1 June 12, MH
3 ZP50-240-9 -3687 2851 - - - - #1 June 12, MH
4 - 3714 -1193 - - - - -
5 ZP24-133-3 45 -1268 -1280 52.4 2505 500 #1 June 12, MH
6 -4000 -1554 -1280 - - - -
7 - - - - - - -


OSA

OSA # OSA description Date installed
4 none -
3 none 02/02/10
2 100 um 02/02/10 lead on back
1 30 um inside cone 02/02/10

Focus of the ZP24/133sngl zone plate:

Energy (keV) at DCM Focus Z Remarks
10.0 1150 Mar/5/09 Cr wire/Staff
11.2 -2030 Mar/19/09 Ni pad/Moutanabbir

Condenser module (CM) out:
Condensor X = -3500
Condensor Y = -6000
Condensor Z =


Imaging optics module (IOM) out:
Objective X =
Objective Y = -2500
Objective Z =