Difference between revisions of "12-BM-wiki"
| Line 14: | Line 14: | ||
Typical Setup for Remote Running of Sample Frames | Typical Setup for Remote Running of Sample Frames | ||
=== Remote Components === | === Remote Components/Commands === | ||
* Sample Frames | * Sample Frames | ||
* Gripper | |||
** > gripper_tilt (puts gripper/frame at 45 for Fluorescence measurements) | |||
** > gripper_flat (puts gripper/frame in transmission measurement) | |||
** > gripper_on (gripper will close to secure frame) | |||
** > gripper_off (gripper will open and let go of sample frame) | |||
* Sample Frame Vertical Motion | |||
** > sav | |||
* Sample Horizontal Motion | |||
** > sah | |||
* sbin (Sample Bin that holds Sample Frames) | * sbin (Sample Bin that holds Sample Frames) | ||
** Holds up to 7 Frames (1 thru 7) | ** Holds up to 7 Frames (1 thru 7) | ||
*** position 1 = 0 | *** position 1 = 0 | ||
*** position 2 = 15 | *** position 2 = 15 | ||
*** position 3 = 30 | |||
*** position 4 = 45 | |||
*** position 5 = 60 | |||
*** position 6 = 75 | |||
*** position 7 = 90 | |||
=== Commands for Remote/Sample Changing === | === Commands for Remote/Sample Changing === | ||
Revision as of 20:19, 13 October 2021
|
External Links
Remote Guide:
Typical Setup for Remote Running of Sample Frames
Remote Components/Commands
- Sample Frames
- Gripper
- > gripper_tilt (puts gripper/frame at 45 for Fluorescence measurements)
- > gripper_flat (puts gripper/frame in transmission measurement)
- > gripper_on (gripper will close to secure frame)
- > gripper_off (gripper will open and let go of sample frame)
- Sample Frame Vertical Motion
- > sav
- Sample Horizontal Motion
- > sah
- sbin (Sample Bin that holds Sample Frames)
- Holds up to 7 Frames (1 thru 7)
- position 1 = 0
- position 2 = 15
- position 3 = 30
- position 4 = 45
- position 5 = 60
- position 6 = 75
- position 7 = 90
- Holds up to 7 Frames (1 thru 7)
Commands for Remote/Sample Changing
NX Quick Start Guide
Here are the instructions for accessing beamline workstations:
- Login to the NoMachine Portal here: https://delos.aps.anl.gov (either your ANL LDAP username/password or the DM credentials "d<badge>/esaf password")
- Select the system you want to connect to, and click the Connect button.
- Select an existing virtual desktop, and click the Connect button.
To create a new virtual desktop, select "Create a new virtual desktop", and see the instructions here
At this point, you should be at a Gnome desktop where you can open applications.
You can adjust display settings in the Display settings panel, which you can access by clicking the "peel back" in the upper right corner. NX desktops run better with more network bandwidth. The default settings should be fine for most connections. In some cases however, you may have to make adjustments. For example, on a 15Mbps connection, you may have to lower the Quality level slider to get the desktop to run smooth.
For more details, including how to reset your DM password, see the following doc(s):
Documents for NX
Remote Access to APS Beamlines using NoMachine Cloud Server
Guide to the NoMachine Menu Panel for Web Sessions
