12-BM-wiki

12BM XSD-CMS Wiki User Information

External Links

• 12BM APS Homepage
• 12BM local User Homepage

Remote Guide:

Typical Setup for Remote Running of Sample Frames (include image with labels)

Remote Components/Commands

• Sample Frames
  • There are 15 positions on the Sample Frame the following command moves to each position
  • > move_to_position 1 (Use 1 thru 15 for positions)

• Gripper
  • > pickup_n_go (grabs the Sample Frame from the sbin and moves to position 1
  • > drop_to_sbin (puts the Sample Frame back into the sbin slot)
  • > gripper_tilt (puts gripper/frame at 45 for Fluorescence measurements)
  • > gripper_flat (puts gripper/frame in transmission measurement)
  • > gripper_on (gripper will close to secure frame)
  • > gripper_off (gripper will open and let go of sample frame)

• Sample Frame Vertical Motion
  • > sav
• Sample Horizontal Motion
  • > sah

• sbin (Sample Bin that holds Sample Frames)
  • Holds up to 7 Frames (Slots are 1 thru 7)
  • > umv sbin 15 (will move the sbin to Slot 2)
    • position 1 = 0
    • position 2 = 15
    • position 3 = 30
    • position 4 = 45
    • position 5 = 60
    • position 6 = 75
    • position 7 = 90

• Detector (Vortex4ME)
  • The Detector can be moved from 0 (farthest away from Sample Frame) to 130mm (Closest to Sample Frame)
  • > umv det 50 (moves the Detector to 50mm)
  • > umv det -5 (moves the Detector to 5mm)

NX Quick Start Guide - Remote Access

Here are the instructions for accessing beamline workstations:

1. Login to the NoMachine Portal here: https://delos.aps.anl.gov (either your ANL LDAP username/password or the DM credentials "d<badge>/esaf password")
2. Select the system you want to connect to, and click the Connect button.
3. Select an existing virtual desktop, and click the Connect button.

To create a new virtual desktop, select "Create a new virtual desktop", and see the instructions here

At this point, you should be at a Gnome desktop where you can open applications.

You can adjust display settings in the Display settings panel, which you can access by clicking the "peel back" in the upper right corner. NX desktops run better with more network bandwidth. The default settings should be fine for most connections. In some cases however, you may have to make adjustments. For example, on a 15Mbps connection, you may have to lower the Quality level slider to get the desktop to run smooth.

For more details, including how to reset your DM password, see the following doc(s):

Documents for NX

Remote Access to APS Beamlines using NoMachine Cloud Server

System Requirements

Guide to the NoMachine Menu Panel for Web Sessions

NX Beamline Portal Presentation

NoMachine Spectator Mode