Difference between revisions of "Remote Access"

From Remote Access
Jump to navigationJump to search
Line 3: Line 3:
Here are the instructions for accessing beamline workstations:
Here are the instructions for accessing beamline workstations:
# Login to the NoMachine Portal here (Use your PSC badge account): https://delos.aps.anl.gov
# Login to the NoMachine Portal here (Use your PSC badge account): https://delos.aps.anl.gov
# Select the system called "QUARTZ", and click the Connect button.
# Select the system you want to connect to, and click the Connect button.
# Select "Create a new virtual desktop", and click the Continue button.
# Select "Create a new virtual desktop", or select an existing virtual desktop.
# Click Continue button.
At this point, you should be at a Gnome desktop where you can open applications.  
At this point, you should be at a Gnome desktop where you can open applications.  


You can adjust display settings in the Display settings panel, which you can access by clicking the "peel back" in the upper right corner. NX desktops run better with more network bandwidth. I have tested on internet connections as low as 18Mbps and as high as 1Gbps. The default settings should be fine for most connections. In some cases however, you may have to make adjustments. For example, on an 18Mbps connection, I had to lower the Quality level slider to get the desktop to run smooth.
You can adjust display settings in the Display settings panel, which you can access by clicking the "peel back" in the upper right corner. NX desktops run better with more network bandwidth. I have tested on internet connections as low as 18Mbps and as high as 1Gbps. The default settings should be fine for most connections. In some cases however, you may have to make adjustments. For example, on an 18Mbps connection, I had to lower the Quality level slider to get the desktop to run smooth.

Revision as of 04:38, 16 June 2020

Quick Start Guide

Here are the instructions for accessing beamline workstations:

  1. Login to the NoMachine Portal here (Use your PSC badge account): https://delos.aps.anl.gov
  2. Select the system you want to connect to, and click the Connect button.
  3. Select "Create a new virtual desktop", or select an existing virtual desktop.
  4. Click Continue button.

At this point, you should be at a Gnome desktop where you can open applications.

You can adjust display settings in the Display settings panel, which you can access by clicking the "peel back" in the upper right corner. NX desktops run better with more network bandwidth. I have tested on internet connections as low as 18Mbps and as high as 1Gbps. The default settings should be fine for most connections. In some cases however, you may have to make adjustments. For example, on an 18Mbps connection, I had to lower the Quality level slider to get the desktop to run smooth.