Difference between revisions of "RRM 3-14"
From EPICSWIKI
(Update synapps links under →Record Types Not in Base) |
|||
| Line 55: | Line 55: | ||
* [[RRM 3-14 Archive|archive - Archive]] | * [[RRM 3-14 Archive|archive - Archive]] | ||
* [http://www.aps.anl.gov/epics/modules/soft/asyn/R4- | * [http://www.aps.anl.gov/epics/modules/soft/asyn/R4-34/asynRecord.html asyn] | ||
* [[RRM 3-14 CPID Control|cpid - CPID Control]] | * [[RRM 3-14 CPID Control|cpid - CPID Control]] | ||
* [[RRM 3-14 PID Control|pid - PID Control]] | * [[RRM 3-14 PID Control|pid - PID Control]] | ||
| Line 66: | Line 66: | ||
* [[RRM 3-14 Wait|wait - Wait]] | * [[RRM 3-14 Wait|wait - Wait]] | ||
* synApps records | * synApps records | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/alive/aliveRecord.html aliveRecord] | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/calc/aCalcoutRecord.html aCalcoutRecord] Array Calculation Output | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/sscan/busyRecord.html busyRecord] Signal put_callback() completion | ||
** [http://cars9.uchicago.edu/software/epics/camacRecord.html | ** [http://cars9.uchicago.edu/software/epics/camacRecord.html camacRecord] Generic CAMAC Record | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/vac/README.txt digitelRecord] Vacuum controller | ||
** [http://cars9.uchicago.edu/software/epics/dxpRecord.html | ** [http://cars9.uchicago.edu/software/epics/dxpRecord.html dxpRecord] | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/std/epidRecord.html epidRecord] Enhanced PID | ||
**[http://cars9.uchicago.edu/software/epics/mcaRecord.html | ** [http://cars9.uchicago.edu/software/epics/mcaRecord.html mcaRecord] Multichannel analyzer, multichannel scaler | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/motor/R6-8/motorRecord.html motorRecord] Stepper and servo motor | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/calc/sCalcoutRecord.html sCalcoutRecord] String Calculation Output | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/std/scalerRecord.html scalerRecord] Multibank counter | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/sscan/sscanRecord.html sscanRecord] Set conditions, trigger detectors, record data, write data files | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/sscan/scanparmRecord.html scanparmRecord] One-button scan | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/std/sseqRecord.html sseqRecord] String sequence | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/calc/swaitRecord.html swaitRecord] Calcout variant | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/optics/tableRecord.html tableRecord.html] Optical table | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/calc/transformRecord.html transformRecord] Calc variant | ||
** [http://cars9.uchicago.edu/software/epics/vmeRecord.html | ** [http://cars9.uchicago.edu/software/epics/vmeRecord.html vmeRecord] Generic VME access | ||
** [ | ** [https://www3.aps.anl.gov/bcda/synApps/vac/README.txt vsRecord] Vacuum sensor | ||
Revision as of 18:16, 2 February 2018
Help Needed!
This documentation has been revised since the older 3-13 version, but the software has been updated significantly since the docs were written so there may still be a number of inaccuracies here. The Editing Tasks page gives some ideas on what else might need doing.
EPICS 3-14 Record Reference Manual
Philip Stanley, Janet Anderson, Marty Kraimer
Wikified by Andrew Johnson and Kazimierz Gofron
- aai - Array Analog Input
- aao - Array Analog Output
- ai - Analog Input
- ao - Analog Output
- aSub - Array Subroutine
- bi - Binary Input
- bo - Binary Output
- calc - Calculation
- calcout - Calculation Output
- compress - Compression
- dfanout - Data Fanout
- event - Event
- fanout - Fanout
- histogram - Histogram
- longin - Long Input
- longout - Long Output
- mbbi - Multi-Bit Binary Input
- mbbiDirect - Multi-Bit Binary Input Direct
- mbbo - Multi-Bit Binary Output
- mbboDirect - Multi-Bit Binary Output Direct
- permissive - Permissive
- sel - Select
- seq - Sequence
- state - State
- stringin - String Input
- stringout - String Output
- subArray - Sub-Array
- sub - Subroutine
- waveform - Waveform
Record Types Not in Base
- archive - Archive
- asyn
- cpid - CPID Control
- pid - PID Control
- pulseCounter - Pulse Counter
- pulseDelay - Pulse Delay
- pulseTrain - Pulse Train
- scan - Scan
- steppermotor - Stepper Motor
- timer - Timer
- wait - Wait
- synApps records
- aliveRecord
- aCalcoutRecord Array Calculation Output
- busyRecord Signal put_callback() completion
- camacRecord Generic CAMAC Record
- digitelRecord Vacuum controller
- dxpRecord
- epidRecord Enhanced PID
- mcaRecord Multichannel analyzer, multichannel scaler
- motorRecord Stepper and servo motor
- sCalcoutRecord String Calculation Output
- scalerRecord Multibank counter
- sscanRecord Set conditions, trigger detectors, record data, write data files
- scanparmRecord One-button scan
- sseqRecord String sequence
- swaitRecord Calcout variant
- tableRecord.html Optical table
- transformRecord Calc variant
- vmeRecord Generic VME access
- vsRecord Vacuum sensor
