Common Database patterns

From EPICSWIKI
Revision as of 17:59, 23 April 2010 by MichaelDavidsaver (talk | contribs) (add pull alarm status w/ SDIS)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Pull Alarm Status w/o Data

This is useful to bring alarm status in without affecting the value stored in a record. In the following example the alarm status of $(P):set is fetched by $(P):rbv when it is processed, but the value is read from a different record.

record(bo, "$(P):set") {
  field(OSEV, "MAJOR")
  field(FLNK, "$(P):rbv")
}
record(bi, "$(P):rbv") {
  field(SDIS, "$(P):set NPP MS")
  field(DISV, "-1")
  field(INP , "$(P):some:other:record")
}

Combined Setting and Readback

Use when a single PV is desired. Could be used to show the results of rounding in a float to fixed precision conversion.

In the following example the value read from a 'bi' is inverted so that the associated 'bo' acts as a toggle.

record(bi, "$(P):rbv") {
  field(DTYP, "...")
  field(INP , "...")
  field(PINI, "YES")
  field(FLNK, "$(P):inv")
}
record(calcout, "$(P):inv")
  field(CALC, "!A")
  field(INPA, "$(P):rbv")
  field(OUT , "$(P) NPP")
}
record(bo, "$(P)") {
  field(DTYP, "...")
  field(OUT , "...")
  field(FLNK, "$(P):rbv")
}

The important point is the NPP modifier on output link of the 'calcout' record. This updates the VAL field of the 'bo' record (and posts monitors) without processing it.