RRM 3-13 String Input
stringin - String Input
The string input record retrieves an arbitrary ASCII string of up to 40 characters. Several device support routines are available, all of which are soft device support for retrieving values from other records or other software components.
Parameter Fields
The fields fall into the following categories.
- scan parameters
- read parameters
- operator display parameters
- run-time and simulation mode parameters
Scan Parameters
The string input record has the standard fields for specifying under what circumstances it will be processed. These fields are listed in Scan Fields. In addition, Scanning Specification explains how these fields are used.
Read Parameters
The INP field determines where the string input record gets its string. It can be a database or channel access link, or a constant. If constant, the VAL field is initialized with the constant and can be changed via dbPuts. Otherwise, the string is read from the specified location each time the record is processed and placed in the VAL field. The maximum number of characters that the string in VAL can be is 40. In addition, the appropriate device support module must be entered into the DTYP field.
See Address Specification for information on specifying links. The user can see a list of the device support modules currently supported at the user's local site by using the dbst utility (R3.13).
| Field | Summary | Type | DCT | Initial | Access | Modify | Rec Proc Monitor | PP |
|---|---|---|---|---|---|---|---|---|
| VAL | Value | STRING [40] | Yes | Null | Yes | Yes | Yes | Yes |
| INP | Input Link | INLINK | Yes | 0 | No | No | N/A | No |
| DTYP | Device Type | DEVCHOICE | Yes | 0 | Yes | No | No | No |
Operator Display Parameters
See Fields Common to All Record Types for more on the record name (NAME) and description (DESC) fields.
| Field | Summary | Type | DCT | Initial | Access | Modify | Rec Proc Monitor | PP |
|---|---|---|---|---|---|---|---|---|
| NAME | Record Name | STRING [29] | Yes | 0 | Yes | No | No | No |
| DESC | Description | STRING [29] | Yes | Null | Yes | Yes | No | No |
Alarm Parameters
The string input record has the alarm parameters common to all record types. Alarm Fields lists other fields related to a alarms that are common to all record types.
Run-time and Simulation Mode Parameters
The old value field (OVAL) of the string input is used to implement value change monitors for VAL. If VAL is not equal to OVAL, then monitors are triggered.
| Field | Summary | Type | DCT | Initial | Access | Modify | Rec Proc Monitor | PP |
|---|---|---|---|---|---|---|---|---|
| OVAL | Output Value | STRING | No | Null | Yes | No | No | No |
The following fields are used to operate the string input in the simulation mode. See Simulation Mode for more information on simulation mode fields.
| Field | Summary | Type | DCT | Initial | Access | Modify | Rec Proc Monitor | PP |
|---|---|---|---|---|---|---|---|---|
| SIOL | Simulation Value Location | INLINK | Yes | 0 | No | No | N/A | No |
| SVAL | Simulation Value | STRING [40] | No | Null | Yes | Yes | No | Yes |
| SIML | Simulation Mode Location | INLINK | Yes | 0 | No | No | N/A | No |
| SIMM | Simulation Mode | GBLCHOICE | No | 0 | Yes | Yes | No | No |
| SIMS | Simulation Mode Alarm Severity | GBLCHOICE | Yes | 0 | Yes | Yes | No | No |
Record Support
Record Support Routines
Three record support routines are provided: init_record, process, and get_value.
init_record
This routine initializes SIMM with the value of SIML if SIML type is CONSTANT link or creates a channel access link if SIML type is PV_LINK. SVAL is likewise initialized if SIOL is CONSTANT or PV_LINK.
This routine next checks to see that device support is available and a record support read routine is defined. If either does not exist, an error message is issued and processing is terminated.
If device support includes init_record, it is called.
process
See next section.
get_value
Fills in the values of struct valueDes so that they refer to VAL.
Record Processing
Routine process implements the following algorithm:
- Check to see that the appropriate device support module exists. If it doesn't, an error message is issued and processing is terminated with the PACT field still set to TRUE. This ensures that processes will no longer be called for this record. Thus error storms will not occur.
- readValue is called. See Simulation Mode for more information on simulation mode fields and how they affect input.
- If PACT has been changed to TRUE, the device support read routine has started but has not completed reading a new input value. In this case, the processing routine merely returns, leaving PACT TRUE.
- TIME is set to tslocaltime
- Check to see if monitors should be invoked.
- Alarm monitors are invoked if the alarm status or severity has changed.
- Archive and value change monitors are invoked if OVAL is not equal to VAL.
- NSEV and NSTA are reset to 0.
- Scan forward link if necessary, set PACT FALSE, and return.
Device Support
Fields Of Interest To Device Support
Each stringin input record must have an associated set of device support routines. The primary responsibility of the device support routines is to obtain a new ASCII string value whenever read_stringin is called. The device support routines are primarily interested in the following fields:
| Name | Summary | Description |
|---|---|---|
| PACT | Processing Active | See Fields Common to All Record Types for an explanation of these fields. |
| DPVT | Device Private | |
| UDF | VAL Undefined | |
| VAL | Value | This field is set by the device support routines. |
| INP | Input Link. | This field is used by the device support routines to locate its input. |
Device Support Routines
Device support consists of the following routines:
report
report(FILE fp, paddr)
Not currently used.
init
init()
init_record
init_record(precord)
This routine is optional. If provided, it is called by the record support init_record routine.
get_ioint_info
get_ioint_info(int cmd,struct dbCommon *precord,IOSCANPVT *ppvt)
This routine is called by the ioEventScan system each time the record is added or deleted from an I/O event scan list. cmd has the value (0,1) if the record is being (added to, deleted from) an I/O event list. It must be provided for any device type that can use the ioEvent scanner.
read_stringin
read_stringin(precord)
This routine must provide a new input value. It returns the following values:
- 0: Success. A new ASCII string is stored into VAL.
- Other: Error.
Device Support For Soft Records
The Soft Channel module places a value directly in VAL.
If the INP link type is constant, the double constant, if non-zero, is converted to a string and stored into VAL by init_record, and UDF is set to FALSE. If the INP link type is PV_LINK, then dbCaAddInlink is called by init_record.
read_stringin calls recGblGetLinkValue to read the current value of VAL. See Soft Input.
If the return status of recGblGetLinkValue is zero, then read_stringin sets UDF to FALSE. The status of recGblGetLinkValue is returned.
EPICS Record Reference Manual - 19 MAY 1998
