RRM 3-14 Menu Choices

EPICS Record Reference Manual

Menu Choices

GBLCHOICE and RECCHOICE Fields

Some of the fields in EPICS records are of type GBLCHOICE or RECCHOICE, meaning that the value of the field must be one from a menu of specific choices. There are several different menus available and each GBLCHOICE or RECCHOICE field uses one. For instance, the simplest menu is called menuYesNo and has two possible choices, NO and YES; no other values for a field that uses menuYesNo are possible--0.5, MAYBE, and NO WAY are not possible choices for the field. In addition, when a menu field is configured to have a certain value, its value string must match exactly one of the possible choices in its menu, including its case. For instance, if a field's type is GBLCHOICE and its menu is menuYesNo, the choices yes, No, and Yes are not valid choices: they don't match the case of NO or YES.

There are several menus provided as part of the standard EPICS release. Here are their names:

• seqSELM
• selSELM
• menuYesNo
• menuSimm
• menuScan
• menuPriority
• menuOmsl
• menuLinr
• menuIvoa
• menuFtype
• menuConvert
• menuCompress
• menuAlarmStat
• menuAlarmSevr
• fanoutSELM
• compressALG
• aoOIF

A few of these menus are record-specific. For example, aoOIF is used solely by the OIF field in the analog output record. Any field using one of these menus will be of type RECCHOICE. Most of the above menus, however, are used by many different fields in different records. These are of type GBLCHOICE. For example, the menuAlarmSevr menu is used by the LLSV field in the analog input record as well as the COSV field in the binary input record, among others.

The above menus and their choices are provided as part of the standard EPICS release; however, developers can add to, delete, or change the choices of each, as well as add new menu types. (See the Application Developer's Guide for your release for more information on how to add and change existing menus). Thus, the database designer should know that the available menus and their choices may vary from site to site. The designer must be familiar with the menu and menu choices for any fields he/she is configuring. This isn't a problem for most database designers because such tools as VDCT, GDCT, and Capfast allow the designer configuring the database to choose from the specified choices. Nonetheless, there are ways a designer can figure out the available choices for a particular menu and thus for a particular field without using a database configuration tool.

Determining the Choices of a GBLCHOICE or RECCHOICE Field

Peeking at the Database Definition Files

The definition for a particular menu can be found by looking at the database definition or .dbd file for that menu. For instance, the menuAlarmSevr.dbd file contains the definition for the menuAlarmSevr menu. In addition, you can see which menu a GBLCHOICE field uses by looking at the dbCommonRecord.dbd file if the field is common to all record types or by looking at the file that defines that record type if the field is not command to all record types. For example, to see which menu the OIF field uses, one would have to look in the aoRecord.dbd file which contains the definition for the analog output record, because OIF is particular to the analog output record and is not common to all other record types. RECCHOICE menus are defined in the definition file for the record type in which they are used, usually at the beginning. For example, the field OIF is of type RECCHOICE and uses the aoOIF menu which is defined at the beginning of aoRecord.dbd.

Standard Menu Definitions

Here are the definitions for the menus available as part of the standard EPICS release. The designer should know that the definitions of these menus may be different at his/her site and these are provided merely as a convenience. It's recommended that you use the dbst utility to view menu choices. Remember that the actual choices appear in quotes.

seqSELM

choice(seqSELM_All,"All")
choice(seqSELM_Specified,"Specified")
choice(seqSELM_Mask,"Mask")

selSELM

choice(selSELM_Specified,"Specified")
choice(selSELM_High_Signal,"High Signal")
choice(selSELM_Low_Signal,"Low Signal")
choice(selSELM_Median_Signal,"Median Signal")

menuYesNo

choice(menuYesNoNO,"NO")
choice(menuYesNoYES,"YES")

menuSimm

choice(menuSimmNO,"NO")
choice(menuSimmYES,"YES")
choice(menuSimmRAW,"RAW")

menuScan

choice(menuScanPassive,"Passive")
choice(menuScanEvent,"Event")
choice(menuScanI_O_Intr,"I/O Intr")
choice(menuScan10_second,"10 second")
choice(menuScan5_second,"5 second")
choice(menuScan2_second,"2 second")
choice(menuScan1_second,"1 second")
choice(menuScan_5_second,".5 second")
choice(menuScan_2_second,".2 second")
choice(menuScan_1_second,".1 second")

menuPriority

choice(menuPriorityLOW,"LOW")
choice(menuPriorityMEDIUM,"MEDIUM")
choice(menuPriorityHIGH,"HIGH")

menuOmsl

choice(menuOmslsupervisory,"supervisory")
choice(menuOmslclosed_loop,"closed_loop")

menuLinr

choice(menuLinrNO_CONVERSION,"NO CONVERSION")
choice(menuLinrLINEAR,"LINEAR")

menuIvoa

choice(menuIvoaContinue_normally,"Continue normally")
choice(menuIvoaDon_t_drive_outputs,"Don't drive outputs")
choice(menuIvoaSet_output_to_IVOV,"Set output to IVOV")

menuFtype

choice(menuFtypeSTRING,"STRING")
choice(menuFtypeCHAR,"CHAR")
choice(menuFtypeUCHAR,"UCHAR")
choice(menuFtypeSHORT,"SHORT")
choice(menuFtypeUSHORT,"USHORT")
choice(menuFtypeLONG,"LONG")
choice(menuFtypeULONG,"ULONG")
choice(menuFtypeFLOAT,"FLOAT")
choice(menuFtypeDOUBLE,"DOUBLE")
choice(menuFtypeENUM,"ENUM")

menuConvert

choice(menuConvertNO_CONVERSION,"NO CONVERSION")
choice(menuConvertSLOPE,"SLOPE")
choice(menuConvertLINEAR,"LINEAR")
choice(menuConverttypeKdegF,"typeKdegF")
choice(menuConverttypeKdegC,"typeKdegC")
choice(menuConverttypeJdegF,"typeJdegF")
choice(menuConverttypeJdegC,"typeJdegC")
choice(menuConverttypeEdegF,"typeEdegF(ixe only)")
choice(menuConverttypeEdegC,"typeEdegC(ixe only)")
choice(menuConverttypeTdegF,"typeTdegF")
choice(menuConverttypeTdegC,"typeTdegC")
choice(menuConverttypeRdegF,"typeRdegF")
choice(menuConverttypeRdegC,"typeRdegC")
choice(menuConverttypeSdegF,"typeSdegF")
choice(menuConverttypeSdegC,"typeSdegC")

menuCompress

choice(menuCompressN_to_1_First_Value,"N to 1 First Value")
choice(menuCompressN_to_1_Low_Value,"N to 1 Low Value")
choice(menuCompressN_to_1_High_Value,"N to 1 High Value")
choice(menuCompressN_to_1_Average,"N to 1 Average")

menuAlarmStat

choice(menuAlarmStat,"NO_ALARM")
choice(menuAlarmStatREAD,"READ")
choice(menuAlarmStatWRITE,"WRITE")
choice(menuAlarmStatHIHI,"HIHI")
choice(menuAlarmStatHIGH,"HIGH")
choice(menuAlarmStatLOLO,"LOLO")
choice(menuAlarmStatLOW,"LOW")
choice(menuAlarmStatSTATE,"STATE")
choice(menuAlarmStatCOS,"COS")
choice(menuAlarmStatCOMM,"COMM")
choice(menuAlarmStatTIMEOUT,"TIMEOUT")
choice(menuAlarmStatHWLIMIT,"HWLIMIT")
choice(menuAlarmStatCALC,"CALC")
choice(menuAlarmStatSCAN,"SCAN")
choice(menuAlarmStatLINK,"LINK")
choice(menuAlarmStatSOFT,"SOFT")
choice(menuAlarmStatBAD_SUB,"BAD_SUB")
choice(menuAlarmStatUDF,"UDF")
choice(menuAlarmStatDISABLE,"DISABLE")
choice(menuAlarmStatSIMM,"SIMM")
choice(menuAlarmStatREAD_ACCESS,"READ_ACCESS")
choice(menuAlarmStatWRITE_ACCESS,"WRITE_ACCESS")

menuAlarmSevr

choice(menuAlarmSevrNO_ALARM,"NO_ALARM")
choice(menuAlarmSevrMINOR,"MINOR")
choice(menuAlarmSevrMAJOR,"MAJOR")
choice(menuAlarmSevrINVALID,"INVALID")

fanoutSELM

choice(fanoutSELM_All,"All")
choice(fanoutSELM_Specified,"Specified")
choice(fanoutSELM_Mask,"Mask")

compressALG

choice(compressALG_N_to_1_Low_Value,"N to 1 Low Value")
choice(compressALG_N_to_1_High_Value,"N to 1 High Value")
choice(compressALG_N_to_1_Average,"N to 1 Average")
choice(compressALG_Average,"Average")
choice(compressALG_Circular_Buffer,"Circular Buffer")

aoOIF

choice(aoOIF_Full,"Full")
choice(aoOIF_Incremental,"Incremental")

---

EPICS Record Reference Manual - 19 MAY 1998